Suppliers of aluminium curtain-walling across Bristol and the West Country
Sandison supply a range of high quality aluminium curtain walls across Somerset and the South-West. Suitable for a range of applications in small and large-scale commercial properties, our curtain waills are supplied by Smarts Architectural Aluminium: one of the industry’s leading systems companies. You can be sure that an aluminium curtain wall from Sandison will be fabricated to the highest quality.
MC Wall
MC Wall
The perfect curtain wall for small and large-scale office applications, the MC Wall features straight and facet-shaped vertical glass walls for increased light transmission and aesthetics. In addition, a high quality thermal break provides increased thermal insulation and extruded EPDM rubbers for enhanced performance.
Features
- Straight and slightly facet-shaped vertical glass walls for small and large office buildings
- Semi-structural front walls with vertically protruding cover caps
- Thermal break
Specifications
- Mullion width: 55 mm
- Sealings: with extruded EPDM rubbers and co-extruded clamping strips
- Glazing options from 24 to 31 mm
- Mullion: 1.616 W/m²K
- Transom: 2.815 W/m²K
- Hardware: EUROGROOVE
- Electrostatic powder coating: according to the guidelines of APA-Qualicoat in most of the current RAL-colours
SC Frame
SC Frame
The SC-Frame is ideal for use on low to medium rise facades such as large shopfronts and showrooms where ease of installing large panes of glass is required. The concise framework offers the advantage of rapid construction on site with minimal loose components; perfect for installations where maximum efficiency is required.
Features
- Thermal break: E.P.D.M. isolator and co-extruded pressure plate
- Tested and approved according to an artificial ageing test of “Plexi glass” combined with vulcanised rubber
- Options of double and single glazing
- Electrostatic powder coating: according to the guidelines of APA-Qualicoat in most of the current RAL-colours
Specifications
- Aluminium: AiMgsi 0.5 Type 6060/6063 T5/T6 in condition F22 (according to NBNP21/001 and DIN 1725
- Tolerance according to DIN 1725
- Sealings: E.P.D.M. according to DIN 7863, TV 110, NFP 85301, ISO 3394
- Co-extruded profiles: according to DIN7863, TV 110, NFP 85301, ISO 3394, tested and approved according to an artificial ageing test of “Plexi glass” combined with vulcanised rubber
- Mullion Width: 55mm
- Sealing: with extruded E.D.P.M rubbers and co-extruded clamping strips
- Glazing: Single glazed: 6, 10 and 12mm
- Double glazed: 24, 28 and 32mm
MC 600
MC 600
The MC 600 is a curtain wall system perfect for us in both small and large-scale multi-storey commercial buildings and ground floor treatment. With interchangeable transom and mullion profiles for added aesthetic continuity the MC 600 utilises a stick-build system for added efficiency during installation.
Features
- Dual colour options available
- Stick-build system increases efficiency of installation
- Interchangeable transom/mullion profile
- Consistent sightlines for maximum aesthetics
- Electrostatic powder coating: according to the guidelines of APA-Qualicoat in most of the current RAL-colours
Specifications
- U Value 1.6W/m²K (depending on design)
- Complies with Document L
- Glass 24mm, 28mm or 32mm
- Air 600pa
- Water 600pa
- Wind 2400pa
- Successfully tested to CWCT standard